About this item

• [Charged in 1 Hour] - The AC180 packs a 1152Wh LiFePO4 battery, which can be fully charged in just 1 hour at 1440W AC input - always ready to go when you need it.
• [Power All Your Needs] - Flexible 4 Recharging Ways (AC/Solar/Car/Generator). The AC180 boasts 1800W output and 9 outlets to handle almost anything you plug in. With a tap on the BLUETTI App, you can give it a boost to 2700W for your higher needs.
• [Solar Fast Charge] - Built-in MPPT charge controller for up to 500W solar input. Fully charge AC180 solar generator in 2.8-3.3 hours with clean, environmentally friendly, renewable solar energy.
• [Reliable UPS] - More than an outdoor power source, the AC180 can also be used as a rugged home battery backup - providing emergency power to your essentials in 20 ms.
• [What You Get] - BLUETTI AC180 portable power station, AC charging cable, car charging cable, solar charging cable, user manual.
• [90-Day Quality Guarantee] — Easy to replace and sufficient power. If there is any quality problem, it will be replaced with A-grade products free of charge within 90 days for you.

FAQ

Q1: What is Power Lifting Mode？
A: In this mode, AC180 can run high-power heating devices up to 2,700W, such as space heaters, hair dryers, electric blankets, etc. Do NOT use this unit to run an air conditioner or washing machine.

Q2: How long can it run my device?
A: The AC180 has different running times depending on the device you're using it with.
*For high-power devices, the running time = Battery capacity × DoD × η ÷ load power.
*For low-power devices, the running time = Battery capacity × DoD × η ÷ (load power + self-consumption of AC180).
*DoD refers to Depth of Discharge and η is local inverter efficiency.
For AC180, DoD is 90%, η is 85%, and self-consumption is about 15W.

E.g. If you run a 100W blender with it, the running time will be:
1152Wh × 90% × 85% ÷ (100W+15W) ≈ 7.66 hrs
Note:
1) The formula is NOT suitable for inductive loads with compressors, like refrigerator, air conditioner, etc.
2) The above data is for reference ONLY.

Q3: What kind of solar panel should I choose for AC180?

A: Please refer to the following requirements:
1. Total open circuit voltage: 12-60V
2. Max. input power: 500W
3. Equipped with MC4 connectors.

***Highly Recommended:
1× BLUETTI 400W Solar Panel: ≈ 3.7 hrs*.
1× BLUETTI 350W Solar Panel: ≈ 4.3 hrs*.
2× BLUETTI 200W Solar Panel: ≈ 3.9 hrs*.
* For reference ONLY.

Q4: Does AC180 support App control?

A: Yes. Once connected via Bluetooth, the BLUETTI App will enable you to control the AC180 remotely, like switching the working mode and upgrading the firmware.

Q5: How can AC180 save power drain?
A:You can turn on the ECO Mode. When on this mode, the AC inverter will automatically turn off after 4-hour low (≤50W) or no load to save power.

Q6: How much noice does AC180 make?
A: 45dB Max., just like the sound generated from a working refrigerator;

Q7: Can I use AC180 as a UPS?
A: Yes

Q8: Can it charge and discharge simultaneously?
A: Yes, the AC180 supports pass-through charging; equipped with the premium LiFePO4 battery and the advanced Battery Management System, just feel free to use it the way that better suits your needs.